Basin filling evolution of the central basins of Mallorca since the Pliocene     

Antonio Cap  Celso Garcia 《Basin Research》2019,31(5):948-966

A new compilation of data from 436 drill cores using decompaction and backstripping techniques was used to reconstruct the basin filling history from the Pliocene until the present day in the Palma, Inca and Sa Pobla Basins on the island of Mallorca (Spain). Calcareous rocks dominate the source area and provide a limited amount of clastic input to the basins that has resulted in an average accumulation rate of between 5 and 20 m/Ma during the last 5.3 Ma. Carbonate sediment production dominated the basin filling history during early‐mid Pliocene, but during the Quaternary, the sedimentation processes in the Palma Basin were probably enhanced by an evolution in the drainage network that increased the sediment supply and the accumulated thickness caused by stream capture. However, the maximum sedimentation rate filling the depocentres of the three basins has been decreasing since the Pliocene, showing that not only the catchment transport efficiency but also the relative sea level have been controlling the sediment accumulation in these carbonate basins. The isopach cross‐sections support the idea that a palaeorelief was generated during the Messinian sea level drop and that heterogeneities were filled in from the Pliocene to the Quaternary. We conclude that the central basins of Mallorca were filled heterogeneously due to tectonic and geomorphic processes that controlled sediment transport and production, resulting in different average sedimentation thicknesses that decreased since the Pliocene as the accommodation space became filled and the relative sea level dropped.  相似文献   

帕米尔高原Rushan-Pshart古特提斯洋或中特提斯洋争论的岩石地球化学证据     

徐天德  王世锋  汤文坤  姚鑫 《地质科学》2020,(1):218-233

帕米尔高原上广泛分布的加里东期火山岩,印支期火山岩与燕山期火山岩被认为是块体依次向北俯冲拼贴到欧亚板块上的产物。特别是燕山期火山岩被认为是Rushan-Pshart中特提斯洋闭合的产物。但近年来地层古生物、火山岩证据不断表明Rushan-Pshart洋闭合时间在晚三叠一早侏罗世,由此限定Rushan-Pshart古特提斯洋性质,而帕米尔高原上广泛分布的燕山期火山岩是更南部的Shyok中特提斯洋闭合的产物。目前,中国境内Rushan-Pshart缝合带属性的研究工作展开较晚,研究程度较低。我们对塔什库尔干明铁盖沟一线燕山期火山岩带展开的工作发现零星分布的印支期花岗岩。印支期花岗岩错石U・Pb年龄显示岩体侵位时间在201 Ma左右。全岩主量元素特征表明岩石为I型高钾钙碱性闪长花岗岩;稀土元素在球粒陨石标准化图解中呈轻稀土元素相对富集,重稀土元素相对亏损的右倾海鸥型。明铁盖岩体的微量元素显示大离子亲石元素明显富集,而高场强元素明显亏损。稀土微量元素特征倾向花岗岩属性为岛弧型花岗岩,Sr-Nd-Hf同位素比值特征显示岩体形成于下地壳部分熔融环境。岩体的地化特征表明岩体形成的构造环境为板块汇聚的洋壳俯冲阶段,结合区域地质特征,我们将花岗岩体归为Rushan-Pshart古特提斯洋壳俯冲消减的产物。Rushan-Pshart缝合带传统上认为是中特提斯带,近年的研究进展认为其为古特提斯缝合带,本文的工作支持这种观点。Rushan-Pshart古特提斯缝合带的确立对帕米尔高原与青藏高原主体的块体对比提供了可信的对比方案,并对青藏高原新生代陆内变形方式的争论提供了可靠的证据。  相似文献   

张宣地区大白阳金矿床包裹体特征及矿床剥蚀保存     

徐渴鑫  申俊峰  李胜荣  黄绍峰  张士全  王业晗 《矿床地质》2020,39(6):1030-1048

华北克拉通破坏及其成矿事件已引起地学界的广泛关注，其中张宣地区是华北克拉通的重要金矿集中区之一，通过对张宣地区大白阳金矿成矿类型、成矿深度及剥蚀保存的探讨，为区内深部找矿提供了重要的参考依据。文章通过流体包裹体研究对大白阳金矿成矿温度及成矿深度进行计算，利用矿物压力计对矿区周边岩体侵位深度进行估算。流体包裹体研究结果显示大白阳金矿成矿温度160~220℃、盐度w（NaCl_eq）=9%~15%，密度0.78~0.97 g/cm³、压力46.3~104.6 MPa，成矿流体主要属于NaCl-H₂O体系，成矿过程中流体温度和盐度都呈现明显的降低趋势。采用黑云母压力计，针对大白阳金矿周边谷嘴子、杨家营以及前坝口花岗质岩体的侵位深度进行估算，并对大白阳金矿自形成以来的剥蚀保存情况进行了探讨，估算结果显示，谷嘴子岩体（236.0 Ma）成岩深度7.02 km、杨家营岩体（138.6 Ma）成岩深度2.66 km、前坝口岩体（140.2 Ma）成岩深度3.13 km。结合前人的裂变径迹结果，认为张宣地区自中生代以来剥蚀速率为0.022~0.029 km/Ma，剥蚀量为3 km。按照前述成矿压力46.3~104.6 MPa换算，大白阳金矿成矿深度6.93 km，剥蚀量小于矿床成矿深度，说明该矿深部仍具有良好的找矿前景。  相似文献   

准噶尔盆地西北缘及玛湖凹陷沉积储集层研究进展^*          下载免费PDF全文

张昌民  尹太举  唐勇  郭旭光  赵康  潘进  陈美玲 《古地理学报》2020,22(1):129-146

准噶尔盆地西北缘玛湖凹陷中心区10×10⁸ t级砾岩大油区的发现,带动了该区沉积储集层研究的不断深入。作者梳理了准噶尔盆地西北缘及玛湖凹陷的沉积储集层研究现状和进展,认为准噶尔盆地西北缘及玛湖凹陷的沉积储集层研究的进展主要表现为: (1)提出了新的砂砾岩储集层岩石相和岩石学分析方法;(2)探索形成了新的沉积储集层地球物理测井和地震描述技术;(3)针对不同层系,在沉积物源、沉积相、沉积环境、沉积体系和沉积模式等方面取得大量新认识,建立了大型退覆式浅水缓坡扇三角洲沉积模式,指导油气勘探不断获得新突破;(4)在成岩作用理论指导下,所发现的储集层埋藏深度不断增加。研究表明,玛湖凹陷的沉积体系具有继承性: 从二叠纪到新近纪,发育了火山—碎屑岩沉积体系、细粒—蒸发盐沉积体系以及粗粒冲积扇、扇三角洲、辫状河三角洲等沉积体系,气候、构造和湖平面变化控制了沉积体系的形成和演化。沉积储集层研究为玛湖砾岩大油田的发现提供了有力的理论支持。未来应当加强针对古老层系和深部地层的沉积储集层研究工作,重视新理论新技术在西北缘和玛湖沉积储集层研究中的应用,已经形成的理论技术需要在勘探实践中接受进一步检验和完善。  相似文献   

新疆和田地区耕地面源污染生态风险评价          下载免费PDF全文

田丰收  刘新平  原伟鹏 《干旱区地理》2019,42(2):295-304

随着化肥、农膜等在农业生产中的过量投入，耕地面源污染的程度随之加重。文章选取塔里木河流域上游和田地区为研究区域，依据P-S-R框架理论，构建和田地区耕地面源污染生态风险评价指标体系，加入土壤理化数据，使用生态风险评价模型对和田地区1980 年及2016 年耕地面源污染状况进行生态风险评价，运用耕地生态风险模型、生态风险转移矩阵、Arcgis分析和田地区耕地面源污染时空分异状况。研究结论如下：和田地区1980 年耕地生态风险等级均为II级或III级，呈“中间高，两侧低”分布；2016 年耕地生态风险等级上升至IV级或V级，呈“倒W型”分布，各县耕地面源污染程度较1980 年均有较大幅度的上升，其中墨玉县和于田县在2016 年耕地生态风险等级达到最高的V级，而民丰县因自身生态环境的强脆弱性，同样需要提高关注。根据面源污染“从源头治理”的原则，应切实推进和田地区耕地生态环境保护与治理，提高政府重视程度，增强技术指导，开展试点工作，改善和田地区耕地面源污染现状。  相似文献   

Land Resource Carrying Capacity in Xilin Gol Grassland Transects: A Perspective on Food Nutritional Demand     

YANG Wanni  ZHEN Lin  LUO Qi 《资源与生态学报(英文版)》2019,10(6):614-620

Food safety is an important issue for the development of the national economy and society. Studying regional food supply and demand from the perspective of land resource carrying capacity can provide new references for regional resource sustainability. This study uses the data from farmer and herdsmen household questionnaires, statistical data, land use data, and other sources to construct a land resource carrying capacity (LCC) assessment framework, targeting the food supply and demand of residents in representative areas, specifically the typical grassland pastoral areas, sandy pastoral areas and agro-pastoral areas on the Xilin Gol grassland transects. The three food nutritional indicators of calories, protein and fat were selected for analyzing the balance of land resource carrying capacity. We found that: 1) Along the Xilin Gol grassland, the main local food supply showed a shift from meat and milk to grains, vegetables and fruits. 2) From north to south along the grassland transects, the calorie intake increased gradually, while the intake of protein and fat was highest in pastoral areas and lowest in agricultural areas. 3) The overall land resource carrying capacity of the Xilin Gol grassland transects was in a surplus state, but the land carrying capacity of typical grassland pastoral area was higher than the two other types of areas. This study provides an empirical reference for the sustainable development of regional food nutrition.  相似文献   

高精度直升机机载LiDAR在高速公路改扩建勘测中的应用可行性研究          下载免费PDF全文

郑伟安 《山东国土资源》2018,34(8)

机载LiDAR在公路勘测方面的用途日益广泛。该文对直升机机载LiDAR在高速公路改扩建中的应用技术路线可行性进行了研究论证,从地面控制测量、点云数据获取、点云数据处理、成果应用等多个方面进行了阐述,通过分析LiDAR点云数据在5种不同地面控制点布设方案校正下的点云数据精度,论证了利用地面控制点对直升机机载LiDAR点云数据进行平面和高程校正的可行性。  相似文献   

南海南部次表层叶绿素a质量浓度最大值及其影响因子*     

廖秀丽  戴明  巩秀玉  刘华雪  黄洪辉 《热带海洋学报》2018,37(1):45-56

文章分析了2013年南海南部4个季节航次的叶绿素a (Chl a)调查数据, 结果显示: 150m以浅水柱Chl a质量浓度均值分别为早春0.14mg•m^-3、初夏0.12mg•m^-3、初秋0.18mg•m^-3、初冬0.16mg•m^-3。早春和初夏偏低的原因与早春风速小, 初夏水温高, 不利于水体的垂直混合, 限制了深层海水中丰富的营养盐向上层水体补充有关。4个季节中海水次表层Chl a质量浓度最大值层(SCML)均出现在50m和75m, 这两个水层的Chl a质量浓度差异小, 季节变化不大, 平均值变化范围分别为0.24~0.26mg•m^-3和0.22~0.26mg•m^-3。受混合层深度和温跃层上界深度的共同影响, 50m水层Chl a质量浓度主要受制于深层富营养盐海水的向上补充, 75m水层Chl a质量浓度受水温的影响明显。  相似文献   

Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

不同排列方式和间隙比下双圆柱流致振动特性研究   总被引：1，自引：0，他引：1  

刘巨保  杨明  岳欠杯  丁宇奇  姚利明 《海洋工程》2018,36(4):105-113

采用基于ALE的流固耦合分析方法,将圆柱体振动模型简化为平面双自由度质量-弹簧-阻尼系统,进行了计算参数无关性分析。对不同θ角和间隙比T下的双圆柱流致振动进行数值模拟,并与单圆柱振动计算结果进行比较,得到了不同θ角和间隙比T下中心圆柱的升阻力系数、流场分布和运动轨迹变化情况。通过分析发现小间隙比下由于两圆柱间的相互干扰,改变了中心圆柱的尾涡结构,导致了升力和阻力系数随不同θ角而发生变化;小间隙比下由于两圆柱间的相互干扰影响,均使中心圆柱的轨迹在不同θ角下发生了较大的变化,顺流向的振动频率与单圆柱振动时相比出现了多倍频,导致其运动轨迹发生了变化。  相似文献